Linear Actuator Size 17 Double Stack
Part Number Construction
 
Newsletter Sign Up
Name
Email
Submit
Questions?  Call 800-243-2715
      
       Download Catalog
Related Companies & Brands
 
 
CHARACTERISTICS TECHNICAL DIAGRAMS PERFORMANCE CURVES 3D MODEL

 

43000 SERIES SIZE 17 DOUBLE STACK STEPPER MOTOR LINEAR ACTUATORS

The Haydon™ size 17 hybrid stepper motor linear actuators are our best selling compact hybrid motors. The various patent pending designs deliver high performance, opening avenues for equipment designers who previously settled for products with inferior performance and endurance. Three designs are available, captive, non-captive and external linear versions. The 43000 Series stepper motor linear actuators are available in a wide variety of resolutions - from 0.00006” (.001524 mm) per step to 0.00192” (.048768 mm) per step - and delivers thrust of up to 50 lbs. (23 Kg), or speeds exceeding 3 inches (7.62 cm) per second.

Standard Lubrication Options - Grease, No Grease, TFE Coating


 

 

Captive Non-Captive External
Size 17 Stepper Motor Linear Actuator
Size 17 Stepper Motor Linear Actuator
Size 17 Stepper Motor Linear Actuator
Download 2D/3D Model
» Technical Drawing
Download 2D/3D Model
 
SALIENT CHARACTERISTICS - SERIES 43000 HYBRID  STEPPER MOTOR LINEAR ACTUATOR
SIZE 17: 43mm (1.7") DOUBLE STACK HYBRID LINEAR ACTUATOR ( 1.8 Degree Step Angle)
Part No. Captive 43M4(X)-V
Non-Captive 43L4(X)-V
External Lin. E43M4(X)-V
Wiring Bipolar
Operating voltage 2.33 VDC 5 VDC 12 VDC
Current/phase 2.6 A 1.3 A 550 mA
Resistance/phase 0.9 Ω 3.8 Ω 21.9 Ω
Inductance/phase 1.33 mH 8.21 mH 45.1 mH
Power consumption 14 W
Max. Load Limit 75 lbs (337 N)
Temperature rise 135°F (75°C) Rise
Weight 12.5 oz (352 g)
Insulation resistance 20 M Ω
Linear Travel / Step Screw Ø.250" (6.35 mm) Order Code I.D.
inches mm
0.000625 0.0158* B
0.00125 0.0317* C
0.0025 0.0635 Y
0.00375 0.0953 AG
0.005 0.127 Z

*Values truncated

Standard motors are Class B rated for maximum temperature of 130°C.

Special drive considerations may be necessary when leaving shaft fully extended or fully retracted.

 
DIMENSIONAL DRAWING - 43000 SERIES DOUBLE STACK SIZE 17 CAPTIVE STEPPER MOTOR LINEAR ACTUATOR

 

Size 17 Stepper Motor Linear Actuator

 
DIMENSIONAL DRAWING - 43000 SERIES DOUBLE STACK SIZE 17  NON-CAPTIVE STEPPER MOTOR LINEAR ACTUATOR

 

 Size 17 Stepper Motor Linear Actuator

STANDARD SCREW LENGTH AVAILABLE - Up To 10" (254mm)

 
DIMENSIONAL DRAWING - 43000 SERIES DOUBLE STACK SIZE 17 EXTERNAL STEPPER MOTOR LINEAR ACTUATOR

 

Size 17 Stepper Motor Linear Actuator

STANDARD SCREW LENGTH AVAILABLE - Up To 10" (254mm)

 
PERFORMANCE CURVES - 43000 SERIES DOUBLE STACK SIZE 17  STEPPER MOTOR LINEAR ACTUATOR - FORCE VS. PULSE RATE

 

Size 17 Stepper Motor Linear Actuator Force Curve

PERFORMANCE CURVES - 43000 SERIES DOUBLE STACK SIZE 17  STEPPER MOTOR LINEAR ACTUATOR - FORCE VS. LINEAR VELOCITY

 

 Size 17 Stepper Motor Linear Actuator Force Curve
 

Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load accelerated up to speed faster. Also, deceleration can be used to stop the motor without overshoot.

NOTE: All chopper drive curves were created with a 5 volt motor and a 40 volt power supply.

With L/R drives, peak force and speeds are reduced, using a unipolar drive will yield a further 30% force reduction.