|
On board or external
step pulse clock |
Y
|
|
On board or external
single step switch |
Y
|
|
On board or external
step rate control potentiometer |
Y
|
|
On board or external
direction control |
Y
|
|
On board or external
full step/half step control |
Y
|
|
Onboard or externanl
outputs enable control |
Y
|
|
On board output
current control potentiometer |
Y
|
|
External "home"
output |
Y
|
|
External reset
control |
Y
|
|
External chopper
synchronous output |
Y
|
|
The Haydon™ bipolar chopper
drive has been designed for easy set-up and use.
It is ideal for development projects, just connect
a single power supply and a motor and the drive
is ready to run. Motor current is set using an on-board
potentiometer. No external current setting resistors
are required. This feature-packed drive provides
all basic motor controls, including full or half
stepping of bipolar steppers and direction control.
An oscillator circuit is standard on the drive with
an on-board speed control potentiometer. In addition,
external input/output signals allow complete remote
control of all drive functions.
Tech Data
Size: 3.75” x 2.95” x
.86” (95.3 mm x 74.9 mm x 38.1 mm)
Power Requirement: Single unregulated, providing
+24 VDC to +40 VDC
Output Current: Fully adjustable from 66 mA/ø to
3 A/ø
Continuous Rating: 2A/ø
Peak, non-repetitive rating: 3A/ø
Chopper Frequency: ~20 Khz
Onboard Oscillating Range: < 10 pulses/sec. to >
2000 pulses/sec
Micro Stepping: Full step / Half
step capability
|